Hayabusa powered Smart Car (SmartBusa)

[briansmart]

Originally Posted by RACNXTG3

After just seeing the video, I think that engine is PERFECT for the 4-2...dare I say 452?

You shouldn't dare as 452 is the model number for the Smart Roadster.

[Boeschbuilt]

Originally Posted by Ripcord

Every time I look at this setup I wonder to myself if one of these units would be a possibility for using on the motorcycle engine conversion instead of chain drive. It can even be had with reverse, and if I read this right. it even says it bolts right up to the motorcycle output shaft.

That set up is very cool. I kinda don't think it would fit very well in the Smart without moving the engine upwards which would involve a lot more cutting. Also, I think that unit is about $7,000!!!!

Originally Posted by Slow_Evo

Hey man, im new to the forum and im in the market for a Smart, so just wondering what model would be best for the set-up that your building? Or does it even matter?

Anyways, the build looks like it comming along great and keep us posted when you feel comfortable and start selling the kit!

Thanks

Any 2008-2009-2010 Smart fortwo will work just fine.

Originally Posted by Neonspinnazz

IT'S AWESOME TO THE MAX!!!!

Out of curiousity, what's the 0-60 and top speed?

Oh and is it possible to be done to a cabrio?

Just wondering...If I ever get enough $$$ a smartbusa is definitely on my wish list!

Top speed should be 125, no 0-60 yet but from what I see so far it will be impressive.
No problem on the Cabrio, it will work fine

Originally Posted by foyfarlow

looks well done i have to say
i was wondering if you have the final price figured out yet?
also if i shipped my car to you how long would the turn around be?
just trying to get a plan for the future

Final price is around $17K
For now I am saying the turnaround is about two months, these will be hand built to order.

The SmartBusa is getting torn back apart monday and sent to powdercoating. Initial testing has been great, the only weak link is the drive flange which is made out of lazer cut mild steel. The new and improved version will be made from hardened tool steel and wire cut with an EDM. then....lots and lots of burnouts!
Should have more info on my website real soon
Matt

[Turbo42]

How much for just the cage the diff and the axles???????

[Neonspinnazz]

Check out the site he set up!

I've been following this project and if I had a hat on, I would take it off for you...this project is an epic win...

Home of SmartBUSA - Hayabusa GSXR 1300 powered Smart Car.

[jwight]

From the website:

ENGINE: 190HP
TOP SPEED: 120MPH (LIMITED)
0 to 60 MPH: 4.2 SEC
1/4 MILE: 12.4 SEC
CURB WEIGHT: 1650 LB

Those times are amazing, better than some of the "performance" cars out there today. Congrats!

[Neonspinnazz]

Not to mention about 200lb lighter...

[Boeschbuilt]

Hi guys,
Those figures are pure speculation at this point, the numbers are what the math works out to... I havent tested anything like that yet.
I was going to try and wait a couple of weeks to announce the website but I guess the cat is out of the bag now!
I owe 100% of the credit to CubeFX for the website being as cool as it is, Aydar (Cube) with out a doubt is one of the nicest and most talanted guys I know.

The SmartBusa had a few bugs that needed worked out before I could give it a real beating. The last month or so I have ripped the car back apart completly to do some refining as well as powdercoating.
I also built jigs so I could re-produce the frame.
Here are a few pics from today, the car as it sits, and the frame jigs...I will have the parts back from powdercoating tomorrow, I will post pics of that stuff then.

P.S. Baby benz, I can work something out with you when you are ready, it will be in the 6 to 7 thousand range depending on what else you need, (like a jack shaft and such)

[MarkB]

Man I am getting anxious for this. I've been racing my other car...a Suzuki SX4 with a custom turbo. It's fun, but everytime I hear a motorcycle go down the track I picture my little Smart with the Hayabusa motor. That's going to be a blast.

[Boeschbuilt]

Just to show i'm not a total bum that has stopped working on the SmartBusa here are some current pictures. Everything is back from powdercoating and getting re-assembled. I am just waiting for a new drive flange to put the car all back together.
This project is alot for one person to pull off.

[silverbrabus]

Need any ideas for the next project?

V-Tec Powered Smart car (Smartec)