Scangauge installation on iPod gooseneck

[bobhodgen]

I have my Scangauge mounted on a recycled iPod gooseneck. I removed the iPod mount and 12v adapter from the ends of the gooseneck. I attached the gooseneck to the Scangauge with a screw from the back of the Scangauge tapped into the 90 degree fitting on the gooseneck. I used a scrap right angle at the bottom of the gooseneck and tapped into the side of the left cubby with 2 screws.



From the driver's point of view it's just below the line of sight to the left of the steering wheel. I don't have to bring my eyes that far from the road to read the gauge.

[bobhodgen]

As you can see it's not in the way of the AC vent.

[forestacademy]

Nice placement, and good reuse of an old items.

[misscatears]

9999mpg, sweet

[jmonty]

Very nice. Looks like a decent alternative to the above-the-rearview-mirror idea, and it is relatively close to the computer port.

[mvaldes]

Clever idea. Thanks for posting it.