Join Date: Sep 2008
Location: southern Minnesota
Thanked 1,769 Times in 1,163 Posts
Mentioned: 3 Post(s)
Tagged: 0 Thread(s)
Quoted: 594 Post(s)
I made my spider legs using some plastic drain hose with a piece of 2x4 inside them, nailed to another 2x4 with 8 hoses attached to it. I covered the base 2x4 with black shag carpet to keep down the scratching potential. I then tied the bases to the doors and bent the hose legs to make legs. If you find some drain hose with the fabric covering, it looks better. The corrigated drain hose will hold their shape.
The front fangs were made from foamcore board and taped in place with good old duct tape on the back side.
Wouldn't mind a Santa Hat pattern, I like the looks of that hat!!