Alright, so I took car in yesterday to have some repairs done.
Sticky shifter. -Fixed
Peeling carpet. -Ordered new carpet
Opening glovebox. -Fixed
Banging windshield wipers. -Fixed
2.0 update. -Updated
Rattling driver side door. -So far so good.
Most were fixed with no problem. Luckily all under warranty!
HOWEVER,
I got the car home, and the turn signals started to act up. First randomly, they would blink very fast like a bulb was out, then both of my turn signals did go out, then they came back on then they worked fine, then the process would randomly repeat itself.
But now, they are all BUM...
....!
Left turnsignal - All four lights flash (Front & Back)
Right turnsignal - All four lights flash (Front & Back)
Hazards - All four lights flash (Front & Back)
I called the 1-800 service number.
At first I thought I was speaking to a robot, but that changed when I got a little angry...
But, then we got it all worked out, and Mr. Robot understood my frustrations.
Loeber closed at 6

m, this was at 6:30pm
The car is drivable, and sure... I could use arm signals...but I feel like something as simple as turn signals are a very large, visability safety feature in our smart.
So, the smart is being towed, under warranty to Loeber today. And, I am picking up their first smart Loaner car.
I'll let you know how smoothly this all goes.
Wish me luck!