Wellsmart Adapter Status/Check out these rims...

[Evilution]

Originally Posted by lowndex

Please advise.

Please be less vague.

[lowndex]

Originally Posted by Evilution

Please be less vague.

My title stated, "I don't see anything for 451."

[Evilution]

Oh c'mon, don't put important text in the title, keep it in one place.

It won't have anything labeled for the 451 or the 450 or Roadster.
They all have the same PCD and bore so they are all grouped together. It is up to you to decide the thickness and the resulting bore. Resulting PCD is set to 5x112mm.

[mrdezyne]

Originally Posted by Smartbillet

Unfortunately you can't just "pick" a bolt pattern to use. You have to use a 112mm bolt pattern, due to the fact that 1 lug bolt has to pass thru the wheel, and the adaptor, and thread into the hub.

You guys probably already know this but when searching for wheels in a 5x112 pattern, look for wheels for an Audi 5000 Turbo, A4, S4, A6, S6, A8, S8, or 79-84 Quattro. This will be the right pattern but you might have to do some digging to get a usable offset. Happy hunting!

[BimmerDob]

Originally Posted by mrdezyne

You guys probably already know this but when searching for wheels in a 5x112 pattern, look for wheels for an Audi 5000 Turbo, A4, S4, A6, S6, A8, S8, or 79-84 Quattro. This will be the right pattern but you might have to do some digging to get a usable offset. Happy hunting!

Thanks for this info, that wil help a lot in the search on ire Rack.

[16d @ 4]

Anyone know of a shop that I can get these adaptors in the state? or something similar, or do I have to get them from the above German website?