Breathless Performance powerflow Filters in stock on sale. - Smart Car of America Forums : Smart Car Forum

BreathlessPerformance · 02-11-2009, 08:08 PM

Smart PowerFlow High Performance Air Filter

10% off till March 1st

"After all the testing we have found that the factory box is a sealed ram air box, which obtains air flow from only the outside (not hot air from the engine bay). Use of a high flow filter proved to out-perform the so-called cold air induction systems. The intake temp on the stock system, with a good high flow filter, was about 10 to 20 degrees cooler then the others thus giving a higher timing curve and optimum fuel mixture and increased Horsepower. This turned out to be an easy and cheap HP increase. Coupled with our .50 cent mod of the silencer part of the airbox removal again increased the HP and reduced 0-60 and 0-80 by over 1 second.

<LI class=MsoNormal style="COLOR: black">Performance High Air Flow with Excellent Filtration<LI class=MsoNormal style="COLOR: black">Direct Fit <LI class=MsoNormal style="COLOR: black">Designed to Increase Horsepower and Acceleration<LI class=MsoNormal style="COLOR: black">Washable and Reusable<LI class=MsoNormal style="COLOR: black">Will NOT Void Vehicle Warranty<LI class=MsoNormal style="COLOR: black">Lasts up to 60,000 miles before cleaning is required depending on driving conditions<LI class=MsoNormal style="COLOR: black">Works with Original Equipment Manufacturer Vehicle Electronics<LI class=MsoNormal style="COLOR: black">Easy High Performance Add-on <LI class=MsoNormal style="COLOR: black">Easy Install
Environmentally Friendly

BPP’s FILTERS TESTS AND POSTS OUR FINDINGS TO THE STANDARDS MOST OTHER PERFORMANCE FILTER COMPANIES ARE SCARED TO USE:ISO 5011
The ISO (International Organization for Standardization) establishes and specifies uniform test procedures, conditions, equipment and a performance report to permit direct laboratory performance comparison of air filters and induction systems.

Testing to these high standards enables us to accurately measure our products against not only OEM [Original Equipment Manufacturer] equipment, but also to the competition, allowing us to establish the air filter performance benchmark, which we are determined to do.

ISO is a worldwide federation of national standards bodies. The work of preparing International Standards is normally carried out through ISO technical committees. The specific individual International Standard utilized by BPP’s and automotive manufacturers establishes and specifies uniform test procedures, conditions, equipment, and a performance report to permit the direct laboratory performance comparison of air cleaners, in this case, those used on internal combustion engines and compressors used in automotive and industrial applications.
Our filters test at airflows up to 1,000 cfm with its ISO 5011 Test Stand.
ISO 5011
Test Stand to compare airflow
of new intake kits to the
stock setup.
The performance characteristics of greatest interest are airflow restriction (differential pressure), dust collection efficiency and dust capacity. The ISO 5011 Standard is what our Filters adheres to as we seek innovations and improvements in our product line, and to test our products so they meet the highest standard possible. We feel this is the standard that all performance filter manufacturers should be using to develop their products.

The end result is simple: increased horsepower by reducing the restriction of the air filter and/or intake kit while still protecting the engine. Trust your performance needs to the only performance filter manufacturer who tests to these standards and post results.
PowerFlow Air Filter Part # 600-202 $49.99 Minus 10% till March 1stOur Products at Breathless Performance

Ernie