March Turbo Special - Buy Stage 1 and get Stage 2 FREE! (save $795.00)

[jr4488]

For all orders placed by March 31st, buy a Stage 1 Turbo kit for $1,995.00 and get the upgrade to Stage 2 Kit for free. Save $795.00. This introductory promotion ends March 31st and will not be repeated.

With our Stage 2 Turbo Kit, you can instantly change from 85 HP to 115 HP (and back again), by simply turning a dial on your dashboard. It works in realtime. You can even do it while you are driving.

Here is what you get for $1,995.00 -

SMART-Turbo Stage 1:
Garrett GT1241 turbocharger (brand new)
Pre-adjusted waste-gate
Air filter (K&N washable)
Compressor inlet manifold with PCV (aluminum)
Compressor outlet manifold (laser cut stainless - no steel flanges)
Turbine inlet manifold (laser cut stainless - no steel flanges)
Turbine outlet manifold (laser cut stainless - no steel flanges)
Oil flange and restrictor plate
Associated lines, tubing and clamps (no hose clamps and no rubber hoses, it's all silicone and stainless T-band clamps)
Heat shield

[IMG][/IMG]

SMART-Turbo Stage 2:
Electronic boost controller (Blitz SBC-ID SPEC S)

[IMG][/IMG]

The Stage 2 SMART-Turbo can be self-installed in 10 to 12 hours by a competent mechanic with a lift. As part of the installation, it is necessary to remove and replace the oil pan to drill and tap a 1/4” pipe thread. It is also necessary to cut and rotate the exhaust flange 90 degrees.

Factory installation in Costa Mesa, California is $795.00

Call 800-318-5063 for more information or to place an order...

smart Car Turbocharger Kit for smart Car 451

jack

[jr4488]

Here is a demonstration of stage 2...

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/IHqhAbfD8z8&hl=en_US&fs=1&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/IHqhAbfD8z8&hl=en_US&fs=1&rel=0" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

jack

[smart fortimo]

Guess I'm not smart enough to figure out how to view the vid...

[mvaldes]

Originally Posted by jr4488

Here is a demonstration using the boost controller on the Stage 2 Kit...

<object height="385" width="480">
</object>jack

Here's what I get when I try to play the video:

[donnyonee]

.....

[LittoDeviL]

Nice video jack!!! And I gotta admit, that's one great offer you got there!

Larry

[smart fortimo]

Originally Posted by donnyonee

worked fine for me, you guys have to get rid of that 256 dialup.

The fix worked Jack... now can you do something about this ^^^ guy?

[SpeedForceRacing]

I seen you have stage 2 kit and stage 3 kit on your website with horsepower numbers very similair to ours but there is no dyno charts,pictures or even any relevant information expect for the Iphone dyno on your stage 1 kit.Can you post some dyno charts asd more info? It would be nice to see.

[jr4488]

Originally Posted by SpeedForceRacing

I seen you have stage 2 kit and stage 3 kit on your website with horsepower numbers very similair to ours but there is no dyno charts,pictures or even any relevant information expect for the Iphone dyno on your stage 1 kit.Can you post some dyno charts asd more info? It would be nice to see.

With all due respect, the car you used in your dyno runs has performance modifications made at another company added to it. My dyno charts only show a stock car with my turbo kits installed.

Are you willing to disclose these additional third party modifications and post dyno charts with only a stock car and your turbo kits added?...

jack

[fastturb]

damn, I love staying up late at night and talking turbos.

Someday I hope to have a table of who has what but for now it would change way too often