|Topic Review (Newest First)|
|06-05-2013 02:34 PM|
|RickyM||In reality we aren't exactly dealing with a high revving exotic here. Since most everyone is running full synthetic I am guessing most any filter out today won't be the cause of problems. Neglect and abuse will be the major cause of any engine problem. What ever a person usually uses he thinks is the best. Just my 2 cents.|
|06-05-2013 12:39 PM|
|wonderbo||I use mobil 1 m-108 since 0 miles. Change mobil 1 0-40 synthetic every 5000 miles myself up to current 63800 miles. 0.0 problems with anything....just not having enough time to drive the convertible as I would like.|
|06-05-2013 11:53 AM|
I am starting to like Purolator's too.
My Dad's Chevy Cruze air filter was a pita to find, (Advanced Auto) had it for half of the Fram at Maul-Mart.
Oil filters too...
Construction (materials) seemed better too...
|06-05-2013 04:30 AM|
As you can see the By-Pass (relief) P.S.I. is 14-18 not 2 psi...YUP...
This is the one I use ~ It is a little longer, but does not sit lower than the oil pan ~ I spray it flat black, as the filters on Smart can be seen from the rear ~ I change oil & filter every 5,000.
|06-05-2013 01:25 AM|
Next time I am in Maul-mart I am going going to compare a Purolator 14612 and a 14610.
Acura owners and other use the 14610 instead of the '12. Same specs, just longer....
Used a 3600 instead of a 3614 on my Saturn for years...
|05-12-2013 04:58 AM|
|ArthurRW||I've been using a Bosch oil filter, the case is of heavier gauge metal and the filter media is synthetic, not paper, so it's perfect for extended intervals found with synthetic oils. The gasket is synthetic as well, harder than the rubber found in most filters so you need to check to ensure there's no deformities or it might leak. (past experience)|
|05-12-2013 04:08 AM|
Incidentally many filters have quite a low bypass setting which causes the filter to run in bypass mode most if the time. Most filters will do that during startup, but some do it pretty much all of the time since the bypass is set so low. The Fram we looked at was only around 2 psi (this was for the basic cheap Fram, not the new premium filter that they offer now)! Of course the best is a filter that has lower resistance (generally one with more filter area) so that high filter flow is maintained without a large pressure drop.
|05-11-2013 11:55 PM|
Just wanna post an update since I found a Wix mentioned here.
I have been using OE Oil filters and Mobil 1 M108 for a while. My latest oil change was with a Wix 57040 oil filter.
First major observation. Oil pressure at hot idle is LOW, ~ 5psi. I have a a SPA Technique gauge installed for a while. Never had the pressure this low before and this is the only thing that has changed since the last oil change. May swap out back to OE filter to see if it goes away.
|04-17-2013 02:44 AM|
|04-16-2013 07:29 PM|
|OliverB||Wix makes many different store brand oil filters and is, today, considered one of the better filters made. Don't base your decision on a 30 year old experience.|
|This thread has more than 10 replies. Click here to review the whole thread.|