Smart Car of America Forum banner

2016 smart for two transmission issue

1251 Views 7 Replies 4 Participants Last post by  Matrix11229
I'm dealing with a 2016 smart fortwo that has a check engine light on and is saying check transmission on the instrument cluster. I've tried scanning it with the snap on various pro scan tool and it does not want to communicate with any modules on the car. I was reading in some of the other forms sounded like somebody else had the problem when you put it in drive doesn't want to shift but you can put it in the manual mode and shift it manually. But when you shift it manually it almost feels like the clutch is slipping a little bit. Any ideas why the scan tool won't communicate or what's up with the transmission would be very helpful. Thank you in advance For any advice.
1 - 1 of 8 Posts
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.