Smart Car of America Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
453 Posts
The alarm issue is usually due to the motion sensor under the console being mounted upside down. Many just use the workaround that Kane showed you. As for your radio, I would consider replacing it with an aftermarket unit. On your cabrio top issue, I would make sure the side rails are properly installed and latched. You may also want to clean the tracks and relube them. Hopefully, that will allow your top to function properly.
 

·
Registered
Joined
·
453 Posts
You would have to turn it over and remount it. I believe it is located beneath the center console. You would have to remove a seat and pull the carpet back. Check out U-tube, Evilution, and FQ101 and see if they have any tutorials on how to locate and change the motion sensor.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top