[Akp7]

I’m looking to replace the stereo on my 453 (2016) to a touchscreen display. Will this unit work?

Vanku 10.1" Single Din Android 10 Car Stereo with Fastboot, GPS, WiFi, Support Android Auto, Backup Camera, USB/SD, Detachable Touch Screen
by Bztone
Learn more: https://www.amazon.com/dp/B08D3JVV9G/ref=cm_sw_em_r_mt_dp_KMVPAPD3HXV1X50NWFDG

 

[DudeInTheSmart]

Yes, but it will not interface with the steering wheel controls. Take a look at

My new stereo installation

Hi all- I decided that I finally had all I could take of the factory radio. After coordinating with a local car stereo installation shop, I successfully installed a new Kenwood system. It sounds great and is far FAR * FAR * F A R better than the factory unit. I apologize for the dark...

www.smartcarofamerica.com

And

Has anyone added this Android system to their smart?

They seem to be running between $300 and $380. I did read that your stock amp isn't used.

www.smartcarofamerica.com

And

Android head unit to replace stock radio with JBL for...

Information/advices needed: Currently, I have stock radio with JBL subwoofer (that extra box in the trunk) in my car. I am thinking about replacing the radio with some Android head unit to bring it closer to year 2020. I have seen a lot of replacement models available on ebay for the smart 453...

www.smartcarofamerica.com

 

[Akp7]

Thanks. Those are helpful. I don’t think the lack of steering wheel controls bother me, just more worried about the fit of a standard single din unit, the compatibility of the wiring, and any modifications I’ll need to make as a result (which I’m hoping there are few).

Im tempted to just buy one of the Chinese units on eBay for an easy plug and play but a bit worried about the quality and if there are any issues, the return/refund process.

 

[DudeInTheSmart]

you will have to wire yourself a custom harness from the old to the new. There are fit kits out there, but none sold in the US.

 

[DudeInTheSmart]

Thanks. Those are helpful. I don’t think the lack of steering wheel controls bother me, just more worried about the fit of a standard single din unit, the compatibility of the wiring, and any modifications I’ll need to make as a result (which I’m hoping there are few).

Im tempted to just buy one of the Chinese units on eBay for an easy plug and play but a bit worried about the quality and if there are any issues, the return/refund process.

The one that you linked is a generic Chinese unit. I would go with a 453 specific one. What have you decided to do in the end?