Smart Car of America Forum banner

Battery Update

3358 Views 10 Replies 8 Participants Last post by  Nicholas
Just had my 2.0 tranny update done as well as the battery replacement update. After coming home I always check out what was done. When I looked at the new battery I noticed that the breather tube was broken off. Obviously the new battery is a different shape, so when the tech placed the styrofoam foot rest back in he snapped it off by accident. I called the dealer & they sent a new breather hose. I had to carve out the styrofoam so it would not happen again.
Just thought it would be a good idea to pass this along so we don't get overcome by venting battery gases. Lets see how long it takes SMART corporate to figure this one out!
1 - 1 of 11 Posts
Just went out to the garage and checked wife's battery upgrade preformed last Wednesday, April1st and noticed the black battery vent nipple broken off flush with the battery and no way to repair it that I know of. Any suggestions? Our dealership is three hours drive one way...
JB Weld :D

See less See more
1 - 1 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.