Smart Car of America Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
404 Posts
The code was likely because you're engine was overheating. Hopefully it didn't warp the head. You have to burp the system to remove trapped air. There's a coolant hose in the transmission side that you need to remove and wait until coolant starts pouring out and then hook it back up.
Sadly smart don't have a coolant temperature gauge and you often get a check engine light when it's too late
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top