Smart Car of America Forum banner

horn wires

1899 Views 10 Replies 4 Participants Last post by  OliverB
I found an old junk horn in my junk that works and was wondering if the horn wires were accessible without taking the front end apart.

I was going to just splice into the horn harness.

please advise
1 - 3 of 11 Posts
No not really, they are below were the frond end slopes I correct the wires are underneath about where the windshield slopes down. So, I have to get underneath and drop the lower pan for access to the horn?
1 - 3 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.