Smart Car of America Forum banner

Key fob not communicating with car (accessory around key slot)

2106 Views 6 Replies 6 Participants Last post by  Raymond Ramesar
I can't start my 2006 Smart Car. I have two key fobs, both with good batteries, and I changed one as an extra. Normally, if the door is unlocked and the car is off for a while the ignition locks as shown by a lock icon when one tries to start the car. To unlock the ignition, the unlock door button on the key fob needs to be pressed. The car was left unlocked. Went to start the car today and pressing all the buttons on both key fobs had no affect. It's as if both key fobs had dead batteries. Dealer advises there are no workarounds from having the car towed the 50+ km to them. Any suggestions?
1 - 1 of 7 Posts
We bought a 2015 with 8k miles. Daughter went and bought a diamnd round thing to fit around theckey hole. It was diamond and pink. For a girl. We went next day and it wouldnt start with the key icon poped up. We hwd it towed to dealer and they removed the key ring diamond thing and it started like new. This fixed mine.
  • Helpful
Reactions: 1
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.