Smart Car of America Forum banner
1 - 1 of 1 Posts

·
Administrator
Joined
·
29,760 Posts
Could be an internal SAM problem. From Alldatadiy.com:
The low beam is switched on by rotating the combination switch to switch position 2. The SAM control unit reads in the switch position of the combination switch and actuates the left and right low beam.
The status message "low beams on" is transmitted by the SAM control unit via the CAN to the instrument cluster, which then actuates the low beams indicator lamp.
:)
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top