Smart Car of America Forum banner

1 - 7 of 7 Posts

·
Banned
Joined
·
41 Posts
Discussion Starter #1
Hello,

I have a 2009 Smart Fortwo Brabus Convertible. I made a ref# in one of my welcome posts that my sliding ragtop on the driverside was not sliding forward and it needed help. I did some homework and the slider is not in it's proper track. The slider is in the inside track instead of the middle one.

This a me fix or a dealership fix? I took a photo to help. There a tutorial on how to fix this? I am good at working on cars but I am stumped on how to fix this.

 

·
Registered
Joined
·
8,967 Posts
...from the looks of it it seems to me that this has happen before...that little notch about an inch from the end looks like if it was created by a flat blade driver while trying to pry the slider back on track...I could be wrong...

Jetfuel...I'll go look at our cabrio...
 

·
aka 'smart-1'
Joined
·
1,903 Posts
Same thing happened to me and I was able to fix it.

I retracted the top back to position 1 and pushed and pushed untill it went back into the middle track, then lubed the heck out of it....
 
1 - 7 of 7 Posts
Top