Smart Car of America Forum banner
1 - 18 of 18 Posts

· Registered
Joined
·
101 Posts
Discussion Starter · #1 ·




Purchased in Cali and shipped to Ohio. UPS unfortunately lost the package that contained the original title from the dealer.

Have an Android head unit and the Metra faceplate and cables on the way. Also have a Zencar Level 2 charger on the way. Also have a Konnwei OBD Bluetooth dongle on the way to see if it will show any live battery data in Torque. Otherwise I'll try to build the Odyssey monitor.

Haven't had an electric since a CommutaCar in 2004. What a difference 35 years makes :)

Excited to get my EV smile back

Bobby


Sent from my iPhone using Tapatalk
 

· Administrator
Joined
·
30,130 Posts
Welcome to SCoA! Always good to have another Ohio owner here. :)

Not sure where you are, but if range permits you can join us the weekend of 6-8 April for the Ohio April Fools X Can-Am smart rally in the Dayton area.
 

· Super Moderator
Joined
·
2,157 Posts

· Registered
Joined
·
101 Posts
Discussion Starter · #5 ·
Welcome to SCoA! Always good to have another Ohio owner here. :)



Not sure where you are, but if range permits you can join us the weekend of 6-8 April for the Ohio April Fools X Can-Am smart rally in the Dayton area.


Thanks. I already looked. It's 91 miles over to Dayton from the 'Bus and couldn't make it without some 240v stop on the way.


Sent from my iPhone using Tapatalk
 

· Premium Member
Joined
·
767 Posts
Have an Android head unit and the Metra faceplate and cables on the way.
Congrats on Snowball. Hope he/she meets with your needs. You might want to get the SCOSCHE ST2431B 2011-Up Smart Fortwo Double DIN or DIN w/pocket Install Dash Kit from Amazon. Instead of using the Metra one as it is just flat black finish where the Scosche one matches the rest of the interior plastics with a pebble finish. https://www.amazon.com/SCOSCHE-ST2431B-2011-Up-Fortwo-Install/dp/B00M8E8GMA/ref=sr_1_1?ie=UTF8&qid=1522255462&sr=8-1&keywords=SCOSCHE+ST2431B
 

· Super Moderator
MY08 cabrio MY09 Brabus MY23 Bolt
Joined
·
8,204 Posts
Yep, that's a bummer. I mentioned to Eric Gray at the Columbus dealer that even if I bought an ED from him it wouldn't have enough range to get back to our house. :shrug:
I too had that problem with the Columbus smart Center - "worked" an ED purchase over the weekend but no smart love toward shipping subsidy? :shrug:
 

· Registered
Joined
·
101 Posts
Discussion Starter · #9 ·
Congrats on Snowball. Hope he/she meets with your needs. You might want to get the SCOSCHE ST2431B 2011-Up Smart Fortwo Double DIN or DIN w/pocket Install Dash Kit from Amazon. Instead of using the Metra one as it is just flat black finish where the Scosche one matches the rest of the interior plastics with a pebble finish. https://www.amazon.com/SCOSCHE-ST24...id=1522255462&sr=8-1&keywords=SCOSCHE+ST2431B


Yeah I knew the difference. I felt I read enough ppl were using metra that maybe it's not *that* bad? I'll see

Thanks!

"She" should be fine for my needs :) 19.6mi round trip to my employer

Bobby


Sent from my iPhone using Tapatalk
 

· Registered
Joined
·
101 Posts
Discussion Starter · #14 ·
Meet "Snowball"

Congrats on Snowball. Hope he/she meets with your needs. You might want to get the SCOSCHE ST2431B 2011-Up Smart Fortwo Double DIN or DIN w/pocket Install Dash Kit from Amazon. Instead of using the Metra one as it is just flat black finish where the Scosche one matches the rest of the interior plastics with a pebble finish. https://www.amazon.com/SCOSCHE-ST24...id=1522255462&sr=8-1&keywords=SCOSCHE+ST2431B


Do you have this scosche piece? The Metra does not measure standard double din so my Hu doesn't fit. Metra is 6 13/16 inches ddin standard says 180mm = just over 7 inches. I'm not happy. Can't get an answer on the amazon page "questions" section regarding the scosche size. Looking to get the opening size, maybe you can help?

Thanks
Bobby


Sent from my iPhone using Tapatalk
 
1 - 18 of 18 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top