Smart Car of America Forum banner
1 - 1 of 5 Posts

· Registered
42 Posts
Discussion Starter · #1 ·
Here are a few pictures of my set-up to flat tow my 2009 Passion.

Demco baseplate and tow bar

Front of car showing breakaway switch and 6-pin electrical connector.

Towed battery charger mounted under the dashboard.

Direct-wired 12 volt socket for the RVI3 brake.

Battery disconnect switch. It is wired to disconnect the + side of the battery.

The RVI3 Brake and the Bungee Cord.

1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.