Smart Car of America Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
46 Posts
Discussion Starter #1


I have my Scangauge mounted on a recycled iPod gooseneck. I removed the iPod mount and 12v adapter from the ends of the gooseneck. I attached the gooseneck to the Scangauge with a screw from the back of the Scangauge tapped into the 90 degree fitting on the gooseneck. I used a scrap right angle at the bottom of the gooseneck and tapped into the side of the left cubby with 2 screws.



From the driver's point of view it's just below the line of sight to the left of the steering wheel. I don't have to bring my eyes that far from the road to read the gauge.
 

·
Registered
Joined
·
33 Posts
Very nice. Looks like a decent alternative to the above-the-rearview-mirror idea, and it is relatively close to the computer port.
 
1 - 6 of 6 Posts
Top