Smart Car of America Forum banner

seat belt question

2065 Views 13 Replies 6 Participants Last post by  jimvw57
I am doing Uber eats to make extra cash for 2 front rims and 195 tires. I drive and my wife takes the food up to the door.
Her seat belt hangs in the door and she can't remember to check it and the door jamb is getting dented all over the place. I am wondering what luck has been had in cutting the part that is over the seat belt and kinda looks like an anchor. It appears the belt curls up on each side and the distorts the belt causing it to drag on the overhead thingy.

or any other ideas

thanks guys
1 - 1 of 14 Posts
In our 453 the seat belts kept coming loose by pulling through the little slot in the shoulder ring so I put some heat shrink tubing over the crack, works great. Mine are black so you can hardly see the tubing.
Did the same with mine. Passenger side problem same for me in both my previous 451 and current 453. Have even had that issue with some 4 door cars on the rear right side.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.