Smart Car of America Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
861 Posts
Discussion Starter #1
I noticed how black the marker lens looks against the white paint so I though I would remove them and clean the dirt out and put in new bulbs. I couldn't figure out how to remove them without breakage and also could not find anything on a search
 

·
Super Moderator
Joined
·
11,309 Posts
They are held in place by a clip. If you release the fender a bit, you can push on the spring from the door jamb and release the light.
 

·
Registered
Joined
·
861 Posts
Discussion Starter #3
you mean pull the black fender clip out by the hinges to make the fender loose enough to reach in and push the assy out?
 

·
Registered
Joined
·
413 Posts
The clips that hold in the lights mounted just in front of the doors can be depressed through the door hinge opening. Just open the door a bit, look in the opening to to accommodate the hinge and use a long screwdriver to press the clip and push outward. No damage to the panels or bulb housings and no need to loosen body panels.
 

·
Registered
Joined
·
861 Posts
Discussion Starter #7
I see now that the backside of the marker lite assembly is black and all this time I thought it was either dirt or a discolored bulb or both
 
1 - 8 of 8 Posts
Top