Smart Car of America Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hi,


My Smart EV 451 won't charge anymore. It has the optional 22kW charger and when I connect the car to the 22kW charging station, the display of the car says "charging malfunction". If I use the standard wall plug charger (3kW) the red light of the charger blinks. The car won't charge.

When I read the trouble codes there is a code in the 22kW charger:

P0DAA00 : “ there is an internal insulation fault in the vehicle-integrated charger”

Strange thing is that the code reader says there is a code in the 3kW charger as well, but when reading the codes it says there are no codes!

If I delete the code in the 22kW charger the car still won’t charge, but the trouble code only comes back when plugging in the 22kW charging station. Not when I connect the 3kW wall plug charger. Charging with the 3kW wall plug charger still does not work.

Where to start? Hope that someone can help.

Kind regards,

Axel
The Netherlands
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #6 ·
Hi!

Quick update. All you said is true :(
I opened up the charger and I found exactly what is descibred on this internetsite:
BRUSA Charger - a 22 kW fedélzeti (kém) töltő - e-cars.hu

One capacitor exploded (the one on the photograph) and two others are damaged. The exploded one is no longer available (EPCOS B32794D4355K). That is quite frustrating. I am thinking of replacing the charger to a 3,3kW one. Has that been done before?

Kind regards,
Axel



That's a well known serial error. I'm guessing it's still the 22kW-charger the smart came originally with? (Here's a manual on how you can finde it out)




I've got no idea where that information comes from. But it's simply wrong. The 22kW charger ist build in the position, where the 3,7kW charger would be, if you wouldn't have the 22kW charger.



Yea, normally the error come from a single phase going dead. You then have a 2/3 chance of still being able to charge with up to 16A at one phase. Sadly you've got the 1/3 chance on not being able to charge anymore.


You've now got two possibilities:
  1. Your local smart dealer can replace the 22kW charger with a new one. This isn't going to have the same error again, as it's from the fixed new series. But that's going to cost you about 6.000€ .. :/
  2. You are going to remove the charger from the smart and open it. There's a good chance you'll only need to replace a capacitor and it will work again.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top