Hi all, im rebuilding the above engine and have discovered that the barrels are 4 thou out of round, also a bit of water damage due to the head-gasket going. Does anyone know if you can buy oversized pistons or re-sleeve the block?
No design template As it is for a complete smart program heard, we also carry for the 999cc petrol engine of the type 451 (from 2007) already many parts. Here the pistons of the M132910 / M132930 engine Here 0.25mm oversize for appropriately ground blocks Complete with wrist pin and piston rings.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.