Smart Car of America Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,484 Posts
Much easier than any on this - just run some leads with insulated faston or other connectors on the ends (ring connector on the battery end) from the 12V battery to a convienient location for making voltage measurement and also for charging the 12V battery. Mine run through a wiring harness gland through the firewall near the steering column to under the service flap where they can be accessed even if the car is locked.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top