Smart Car of America Forum banner

41 - 50 of 50 Posts

·
Registered
Joined
·
2,872 Posts
Look at the bottom of the front of my smart.

http://www.smartcarofamerica.com/forums/f181/smart-ko-d-highlander-137249/#post1515449

That is a Brabus front spoiler, and no it didn't come that way. I just needed to buy that one piece. (I'm pretty good at finding part numbers, but it did look better before it decided to kiss a Highlander....)

Wish I got a better picture, but I didn't post one here I'm afraid:

http://www.smartcarofamerica.com/forums/f377/brabus-front-spoiler-2013-lci-freeway-stability-114010/#post1297802
 

·
Registered
Joined
·
627 Posts
If the "holes" mean the proximity device openings , it's no big deal , my Lorinser body kit has the holes too, and I don't have that option , it's no big deal .
 

·
Registered
Joined
·
729 Posts
Look at the bottom of the front of my smart.



http://www.smartcarofamerica.com/forums/f181/smart-ko-d-highlander-137249/#post1515449



That is a Brabus front spoiler, and no it didn't come that way. I just needed to buy that one piece. (I'm pretty good at finding part numbers, but it did look better before it decided to kiss a Highlander....)



Wish I got a better picture, but I didn't post one here I'm afraid:



http://www.smartcarofamerica.com/forums/f377/brabus-front-spoiler-2013-lci-freeway-stability-114010/#post1297802


Do you have a part number for this? I've been wanting to add one to my 451.


Sent from my iPad using Tapatalk
 

·
Registered
Joined
·
2,872 Posts
Took me a while to find a picture of the front of your smart and verify it is a '13 with the "facelift" front....

A451 880 04 08
on my receipt it is
"S451-880-04-08"

Not sure it fits properly on the older front....

I may have the installation instructions somewhere. Let me know....

I have an Alibaba carbon fiber version sitting in a box, don't go that route.
 

·
Registered
Joined
·
18 Posts
Not when you have a garage full of tools and the experience and knowledge to use them. Cheapest 450 exhaust I could find at the time was $800. I built mine out of stainless steel for less than $150 and drove it for 4 years until I sold it after I bought my '16. I'll probably build my own for this smart.
Did you ever end up building your own exhaust for the 453? Im also in the IE. Thanks.
 

·
Registered
Joined
·
5,192 Posts
Did you ever end up building your own exhaust for the 453? Im also in the IE. Thanks.
No, I found an exhaust for just over $500 from England from smart specialties. I now have my stock exhaust to use for a pattern. I still may make one. I don't like how low the tips are to not have to cut the valance. I'd cut mine in a heartbeat. Incidentally, you can order the scoop that Smart Madness sells direct from S-Mann for just over $100.
 
41 - 50 of 50 Posts
Top